Umbrella Flare Palazzo Cutting

Previously, we have already learned the cutting methods of straight pant, dhoti pant & sharara pant.
Including full patiala/khajuri salwar, simple salwar & simple salwar part-2.
Here we are going to learn an easy method for umbrella flare palazzo cutting with the body measurements.
Once, we learned palazzo pant & umbrella skirt cutting.
First of all, take a soft(e.g. rayon, silk, etc.) or georgette fabric to make an umbrella flare palazzo.
Secondly, for making an umbrella flare palazzo, we will take 2.5-3m of fabric with a 42″ width in it.
In this, the fabric is made thinner so the lining(astar) is used with it.
A crepe lining looks better in an umbrella flare palazzo.

Required Measurements For Umbrella Flare Palazzo Cutting:

Here is the method to take body measurements.

• Full Length – from the waist till the length to be kept
• Waist – all-around measurement in the waist area
• Seat – full rotating measure in part of the seat

Method:

• For cutting, the fabric is kept in 1 fold and folded into a triangle i.e. the cross side of the triangle will be 2 folds, as shown in figure(a).

Steps with the figure:

• Let’s take an example with measurements as given below:
  • Length: 40″
  • Waist: 36″
  • Seat: 42″
• For cutting, the belt has to be cut separately, so if you want to keep the length of 40″, then keep 40″ in cutting.
• Therefore, as much as the belt comes, it goes into bending and sewing.
• For the waist measurement, take 1/4 of the waist and add 1″ to that.
  • Waist measurement = 36″/4 = 9″+1 = 10″
• Then cut in rounds so that the entire space is 40″, as shown in figure(a).
• Now, for crotch length, take 1/4 of the seat and ass 1.5″ to that.
  • Crotch length = 40″/4 = 10″+1.5 = 11.5″
• Then give the curve of 2″ with that, as explained in figure(a).

• If we want to put a zip then, take 1/4 of the waist in the cutting of the waist.
• If we don’t want to put a zip then, take 1/4 of the seat and add 1″ to the waist.
• Keep the crotch length 0.5″ less on the front side of the umbrella flare palazzo.
• In the cutting of the Umbrella lehenga, like the triangles are joined on the side, similarly, 2 triangles have to be placed in this too.
• The inner lining(astar) should be cut in the same way as regular palazzo pant.
• Now insert the belt and zip from above in the waist area at the front side.
• And putting rubber in the belt at the back side.
• The bottom edge can be bent or overlocked, border at the bottom can also be done.

Other Objectives:

• Umbrella flare palazzo can be paired with regular kurti, crop top, shrug, etc.
• It can also be paired with a peplum.
• We can change the size of the length accordingly; for example, if we reduce the length then it becomes an ankle-length palazzo.

Conclusion:

• I hope this method of umbrella flare palazzo cutting helped you.
• If you have any doubts then feel free to contact us or you can also write in the comment section.